Aluminum Alloy 7075 Plates and Sheets
ALUMINIUM Alloy 7075 Suppliers in Peshawar OFFERS THE HIGHEST STRENGTH OF THE COMMON SCREW MACHINE ALLOYS. THE SUPERIOR STRESS CORROSION RESISTANCE OF THE T173 AND T7351 TEMPERS MAKES Aluminum Alloy 7075 A LOGICAL replacement for 2024, 2014 and 2017 in many of the most critical applications. The T6 and T651 tempers have fair machinability. Alloy 7075 is heavily utilized by the aircraft and ordnance industries because of its superior strength.
Chemical Composition Limits | |||||||||||
Weight% | Al | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Other Each | Others Total |
7075 min | Rem | - | - | 1.2 | - | 2.1 | 0.18 | 5.1 | - | - | - |
7075 max | Rem | 0.40 | 0.50 | 2.0 | 0.30 | 2.9 | 0.28 | 6.1 | 0.20 | 0.05 | 0.15 |
Typical Mechanical Properties
Material | Temper | Thickness (in) | Tensile Strength (ksi) | Yield Strength (ksi) | Elongation % |
Alloy 7075 Sheet | T6 Bare | 0.125 - 0.25 | 78 | 69 | 8 |
Alloy 7075 Sheet | T651 Bare | 0.25 - 0.50 | 78 | 67 | 9 |
Alloy 7075 Sheet | T651 Bare | 0.5 - 1.0 | 78 | 68 | 7 |
Alloy 7075 Sheet | T6 Clad | 0.188 - 0.25 | 75 | 64 | 8 |
Alloy 7075 Sheet | T651 Clad | 0.25 - 0.50 | 75 | 65 | 9 |
Alloy 7075 Sheet | T651 Clad | 0.5 - 1.00 | 78 | 68 | 7 |
Disclaimer
Every effort is made to ensure that technical specifications are accurate. However, technical
specifications included herein should be used as a guideline only. All specifications are
subject to change without any prior notice from Najum Engineering who are pakistan's one of the
best supplier of aluminum alloy plates and sheets based in peshawar, khyber pakhtunkhwa , kpk.